Bobcat® S330
The Bobcat® S330 began production by Bobcat® in 2006 with an additional model released in 2008.
The Bobcat® S330 boasts 3,300 lb. rated capacity – making it the largest in the line. It features an 85 hp turbocharged diesel engine and 12 mph travel speed.
Please direct any questions to our email through our “contact” link or a text message to (563) 845-1986. We appreciate your interest in our products and thank you for supporting small, locally owned businesses.
(563) 845-1986
Showing 1–16 of 28 results
-
Access Cover Plates (Rounded) [6737088] for Clean-Out | Bobcat®
$24.95 Add to cartAccess Cover Plates (Rounded) [6737088] for Clean-Out | Bobcat®
Access Cover Plates (Rounded) [6737088] for Clean-Out | Bobcat®
These Access Cover Plates are for use on machines using a 5.75″ x 5″ bolt pattern. Please check your bolt pattern prior to ordering.
Included w/ Kit:
1 Pair (x2) Access Cover Clean-Out Plates w / 4 Bolts
$24.95 -
Bushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bob-Tach
$14.49 Add to cartBushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bob-Tach
Bushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bob-Tach
This bushing is welded into the frame of the Bob-Tach® and holds the lever in place. Fits LH or RH side.
Handle Studs support your universal quick-attach handle and the handle spring. The handle studs simply wear out over time… Replacing them will help keep the handles tight and help make your Bob-Tach operate like new.
$14.49 -
Bushing [6717259] (Weld-On) for Bobcat® Bob-Tach
$25.95 Add to cartBushing [6717259] (Weld-On) for Bobcat® Bob-Tach
Bushing [6717259] (Weld-On) for Bobcat® Bob-Tach
This bushing is welded into your Bob-Tach. The bushings eventually wear out causing a lot of play in your Bob-Tach. Replacing these weld-on bushings is a lot cheaper than buying a new Bob-Tach.
$25.95 -
Bushing [6717260] (Weld-On) for Bobcat® Bob-Tach
$32.95 Add to cartBushing [6717260] (Weld-On) for Bobcat® Bob-Tach
Bushing [6717260] (Weld-On) for Bobcat® Bob-Tach
This bushing is welded into your Bob-Tach. These wear out over time causing a lot of play in your Bob-Tach. Replacing these Weldon Bushings is a lot cheaper than buying a new Bob-Tach.
When replacing your old bushings in your Bob-Tach, we recommend you find a shop that has an Air Arc or Carbon Arc to remove old bushings. This will greatly reduce the time needed to remove the old bushings.
$32.95 -
Bushing [6718329] (Press-In/Weld-On) for Bobcat® Bob-Tach
$25.95 Add to cartBushing [6718329] (Press-In/Weld-On) for Bobcat® Bob-Tach
Bushing [6718329] (Press-In/Weld-On) for Bobcat® Bob-Tach
This bushing is press-fit into your Bobcat® Bob-Tach. Bushings simply wear out over causing a lot of play in your Bob-Tach.
Replacing bushings is a whole lot cheaper than buying a new Bob-Tach, and will help keep your machine operating like new.
$25.95 -
Bushing [6728999] (Weld-On) for Loader Lift Arm Boom | Bobcat®
$92.95 Add to cartBushing [6728999] (Weld-On) for Loader Lift Arm Boom | Bobcat®
Bushing [6728999] (Weld-On) for Loader Lift Arm Boom | Bobcat®
This bushing comes welded into the Tapered Pivot Pin locations on your Loader’s Lift Arm. The holes are tapered internally for the holes in the Bob-Tach attachment mounting system to help reduce vibration. However, the tapered holes simply wear out over time not allowing for the Pivot Pins to stay tight.
Replacing these bushings is a whole lot less expensive than buying a new Loader Arm Assembly!
$92.95 -
Bushing [6729353] (Weld-On) | Bobcat® Bob-Tach
$92.95 Add to cartBushing [6729353] (Weld-On) | Bobcat® Bob-Tach
Bushing (Weld-On) [6729353] | Bobcat® Bob-Tach
This Pivot Bushing is used on your lower Bob-Tach. The bushings eventually wear out causing a lot of play and other issues with your Bob-Tach. Removing the old bushings and welding in new ones can help make your machine operate like new.
Our replacement Pivot Bushing (Weld-On) [6729353] ships complete with Bushing (Press-In) [7139943]
RVM RECOMMENDATIONS & TIPS: Please note River Valley Machine suggests you also change Bobcat Pin [6729358]
$92.95 -
Bushing [6805453] (Press-In/Weld-On) for Tilt Cylinder Rod | Bobcat® Bob-Tach
$18.95 Add to cartBushing [6805453] (Press-In/Weld-On) for Tilt Cylinder Rod | Bobcat® Bob-Tach
Bushing [6805453] (Press-In/Weld-On) for Tilt Cylinder Rod | Bobcat® Bob-Tach
REPLACEMENT FOR BOBCAT PART #: 7150182
This bushing is press-fit into Tilt Cylinder Rod Ends. In certain cases of excessive wear these can be welded in as well. Bushings simply wear out over time causing a lot of play in your Bob-Tach. Replacing these Bushings is required and will keep your machine operating like new.
These are hardened bushings and can easily be removed with a torch or air arc. This will greatly reduce the time needed to remove the old bushings.
$18.95 -
Bushing [7139943] (Press-In/Weld-On) for Pivot Pin | Lower Bobcat® Bob-Tach
$22.95 Add to cartBushing [7139943] (Press-In/Weld-On) for Pivot Pin | Lower Bobcat® Bob-Tach
Bushing [7139943] (Press-In/Weld-On) for Pivot Pin | Lower Bobcat® Bob-Tach
This Bushing is press-fit into your Bob-Tach. The bushings wear out over time causing a lot of play in your Bob-Tach. When required, replacing these hardened bushings will keep your machine operating like new.
IMPORTANT RVM Product Tip: This Bushing does NOT feature a grease groove.
$22.95 -
Compression Spring [6578253] for Quick-Attach Handle & Wedge | Bobcat® Bob-Tach
$10.95 Add to cartCompression Spring [6578253] for Quick-Attach Handle & Wedge | Bobcat® Bob-Tach
Compression Spring [6578253] for Quick-Attach Handle & Wedge | Bobcat® Bob-Tach
REPLACEMENT FOR BOBCAT® PART #: 6960841
The Compression Spring fits between the Wedge and your Quick-Attach Handle. These springs put pressure on the wedges to hold your attachment/s securely to your machine.
The springs simply wear out over time… Replacing them can help your Bob-Tach operate like new again.
$10.95 -
Compression Spring [6713040] for Handle | Bobcat® Bob-Tach
$9.95 Add to cartCompression Spring [6713040] for Handle | Bobcat® Bob-Tach
Compression Spring [6713040] for Handle | Bobcat® Bob-Tach
This Compression Spring keeps the handles in the ‘up’ position and keeps your handles nice & tight.
Replacing the Compression Springs in your Quick-Attach Handles can help make your Bob-Tach operate like new again.
$9.95 -
Door Striker (Front) (Magnetic) [7109664] | Bobcat®
$18.95 Add to cartDoor Striker (Front) (Magnetic) [7109664] | Bobcat®
Front Door Striker (Magnetic) [7109664] | Bobcat®
Door Strikers simply wear out over time causing safety concerns. Replacing them will help keep your door operating like new.
$18.95 -
Lock Nut [85D6] for Loader’s Lift Arm & Quick-Attach Handle & Door (Rear) | Bobcat®
$4.49 Add to cartLock Nut [85D6] for Loader’s Lift Arm & Quick-Attach Handle & Door (Rear) | Bobcat®
Lock Nut [85D6] for Loader’s Lift Arm & Quick-Attach Handle & Door (Rear) | Bobcat®
HEX LOCK NUT PRETRQ
$4.49 -
Pivot Pin (Tapered) [6728971] for Upper Tilt Cylinder | Bobcat® Bob-Tach
$59.95 Add to cartPivot Pin (Tapered) [6728971] for Upper Tilt Cylinder | Bobcat® Bob-Tach
Pivot Pin (Tapered) [6728971] for Upper Tilt Cylinder | Bobcat® Bob-Tach
This Pivot Pin is used loader’s Upper Tilt Cylinder. These pins eventually wear out causing a lot of play in your Bob-Tach. Replacing your Pivot Pins can help make your Bobcat operate like new.
$59.95 -
Pivot Pin [6577954] for Lift / Loader Arm & Tilt Cylinder | Bobcat®
$21.95 Add to cartPivot Pin [6577954] for Lift / Loader Arm & Tilt Cylinder | Bobcat®
Pivot Pin [6577954] for Lift / Loader Arm & Tilt Cylinder | Bobcat®
This pivot pin is used on the Loader Arms and Lift Cylinders.
Pivot pins wear out over time causing a lot of play in your machine. Replacing these pins will help make your Bobcat operate like new.
$21.95 -
Pivot Wedge [6704240] | Bobcat® Bob-Tach
$24.95 Add to cartPivot Wedge [6704240] | Bobcat® Bob-Tach
Pivot Wedge [6704240] | Bobcat® Bob-Tach
The Pivot Wedge fits between the Quick-Attach Handle and Wedge. This Pivot Wedge fits Bob-Tach’s not using Power Bob-Tach Cylinder.
$24.95
Showing 1–16 of 28 results